seal ring

1. Study on the Dynamic Auxiliary Seal Ring of Pusher Type Mechanical Seal
   滑移式机械密封的动态辅助密封圈性能研究
2. The result shows that the designed seal ring can meet the application need of the large equipment.
   结果表明，设计的金属橡胶密封环能够满足某大型设备的应用要求。
3. The seal ring made from exotic materials features such specialties as high-temperature resistance, abrasion-resistance, long service-life, etc.
   特殊材料制成的密封圈，具有耐高温。耐磨损、使用寿命长的特点。
4. The upper part of the framework guiding support ring is provided with circular ridges, is mutually inlaid and connected with the seal ring.
   骨架导向支撑环的上部设有环形凸棱并与密封圈相镶嵌连接。
5. The special support frame can perform connection function and connect cooling water to cool down the seal ring.
   特殊安装支架，即起到连接作用，同时又能接通冷却水对密封圈部位进行冷却。
6. Wear-resistant Properties of Plasma Sprayed WC-Co Coating On the Roller Bit Metal Seal Ring Surface
   牙轮钻头金属密封环表面喷涂WC-Co涂层耐磨性研究
7. An Improved Design on Seal Groove and Seal Ring of Spherical Plain Bearing
   关节轴承密封槽及密封圈的设计改进
8. The turning process of carbon-graphite M104 seal ring is focused, and the comparative experimental study on conventional machining and laser-assisted machining are performed.
   针对碳石墨M104密封环的车削加工过程，进行了常规切削和激光辅助切削的对比实验研究；
9. Different body materials and seal ring compound folder layer are suitable for different medium.
   更换阀体材质和密封圈复合夹层可适用不同介质。
10. Lapping Elasticity Seal Ring and Its Application in General Equipment Spin Axis Sealing
    搭接式密封环及其在通用装备旋转体密封中的应用
11. The hydraulic cylinder utilizes clearance seal technology and floating regulation technology, thereby the floating clearance rod seal ring has a long service life.
    本实用新型采用间隙密封技术及浮动调节技术，所以浮动式间隙杆密封环的寿命较高；
12. The seal ring is placed overhead to extend the service life.
    密封胶圈上置，延长使用寿命。
13. Numerical analysis on flow field in mechanical seal with porous seal ring face
    多孔端面机械密封内流场的数值分析
14. Comparison of Numerical Analysis on the Mechanical Seal with Porous Seal Ring Face by Multi-grid and CFD Methods
    基于多重网格法和CFD的多孔端面机械密封数值分析比较
15. According to the surface abrasion form of cast iron seal ring, the author proposed that composite brush plating can effectively repair and strengthen the mating surface of cast iron seal ring.
    根据铸铁密封环的表面磨损形式，提出采用复合刷镀技术可有效修复和强化铸铁密封环的配合面。
16. The upper end of the leakproof valve is provided with a leakproof valve seal ring, and a seal ring is arranged between the water faucet and the liner.
    止漏阀的上端设置有止漏阀密封圈，水龙头和内胆之间设置有密封圈。
17. Sealing performance research of rubber seal ring with different section shape
    不同形状橡胶密封环结构的性能分析
18. To perform high efficient turning of hydraulic carbon-graphite seal ring, the laser-assisted machining of the material of carbon-graphite seal ring is conducted using laser pre-heating.
    为实现液压碳石墨密封环的高效车削加工的目的，采用激光辅助加工方法，进行了碳石墨密封环材料的激光辅助车削加工研究。
19. Solid-Block seal ring design assures long life and reliability under upset conditions
    “在出现非正常情况时，”“支柱”“密封环设计能够保证更长的使用寿命和稳定可靠性”
20. Improvement on Rubber Seal Ring of Plastic Bottle-blower Based on Finite Element Method
    基于有限元分析的PET吹瓶机橡胶密封圈的改进设计
21. If the residual air in cylinder is impacted by abrupt clamp pressure, the seal ring will be damaged due to the effect of diesel oil.
    如果油缸内残留空气受急剧夹压时，那么，由于液压油的作用，有可能使密封圈烧损。上盖板可防止杂物进入缸筒损坏密封。
22. Preparation Technology of Molybdenum Disulfide Coating for Rotating Seal Ring
    旋转密封环表面二硫化钼膜制备工艺研究
23. The exhausting anti-plugging device is good in seal effects, safe and reliable in operation, meanwhile, the service life of the seal ring is also greatly prolonged;
    该排气防堵装置密封效果好，使用安全可靠，同时也大大的延长了密封圈使用寿命；
24. Under normal circumstances, after a spring in the long run will be shortened in length, compensation spring moving mechanical seal ring because centrifugal force will cause deformation.
    一般情况下弹簧在长时间运行后长度会缩短，补偿弹簧在动环上的机械密封还会因为离心力的原因而变形。
25. Through the tight fit among the two pipes, the seal ring and the through pipe, the connecting and sealing effects are achieved.
    通过两管材与密封圈及通管之间配合，达到连接密封作用。
26. Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.
    离心泵的基本构造是由六部分组成的，分别是：叶轮，泵体，泵轴，轴承，密封环，填料函。
27. Flexible sealed valves, seal ring can embed in body or peripheral boards to Tip.
    弹性密封阀门，密封圈可以镶嵌在阀体上或附在蝶板周边。
28. Former deputy leaves on the cover can reduce the imports of the vortex impeller and particle loss of the wear and tear on the seal ring.
    前盖板上的副叶片可以减少叶轮进口的旋涡损失和颗粒对密封环的磨损。
29. Development of E-Shaped Double-Sided Active Sealing Flange Seal Ring for the Braking Pipeline System
    制动管系用E形双面主动密封法兰密封圈的研制

noun

1. a ring bearing a signet

   Synonym:    signet ring